P.E.S. Electro-Flex? Anal Plug - Large Single - 1 1/2" x 6"

Designed as a flexible and softer alternative to our Acrylic Anal Plugs, the Electro-Flex™ Anal Plugs offer a variety of configuration options.

Available in two different sizes as well as in either single pole or double pole versions, the uses for these plugs make them a must have for your collection, especially if you like focused stimulation!!

The double pole Electro-Flex™ Anal Plug can be used alone or it can also be used as a single pole Electrode simply by only connecting one connection point in circuit with another Electrode. The single pole Anal Plug requires a second Electrode in order to complete the circuit.

Conductive Pad A can be used for focused Prostate and Sphincter Stimulation.
Conductive Pad B can be used for focused Prostate Stimulation.

Instructions for Use:
1.) Attach the Low Profile Lead(s) to your connection point(s).
2.) Liberally lubricate the anus, anal cavity and the Anal Plug itself. (If using the memory bend wire, bend the Plug before insertion).
3.) Relax.
4.) Slowly insert the Anal Plug. (If using the memory bend wire, orient the Plug toward the front wall of the anal cavity (toward the stomach) for prostate stimulation.)
5.) If using a single pole Plug, attach the other side of your Low Profile Lead to another Electrode to complete your circuit.
6.) Plug your leads into the Power Box.

The Memory Bend Wire is removable to allow for 'free-floating' electro stimulation.
Simply grasp the purple end cap and pull to remove.
Do not twist the end cap.
The Memory Bend Wire is designed to bend and retain the position of the plug when inserted.
It is not designed to rotate the plug.

Important Safety Notes:

Due to their design, the Electro-Flex™ Anal Plugs should only be used with our low profile lead technology. Use with other leads may cause damage to the Electrode or it may not function properly.

DO NOT use vaginally if the Electrode has been used anally.

General Lubrication: PES recommends the use of a lubricant with all PES Electrodes. Lubricant not only lubricates but also decreases the possibility of hot spots. We recommend PES ElectroLube (Item #75). You can also use Olive Oil. Water-based lubricants, such as Surgilube®, can be used in the event that you do not have either ElectroLube or Olive Oil. Make sure the lubricant you are using is a water-based lubricant with no silicone ingredients. (See General Lubrication).

Caution: Do not use lubricants with silicone ingredients. Silicone is an insulator which greatly affects conductivity, and can chemically bond to the products made from Electro-Flex™ when applied over a long period of time. This will cause the apparatus to cease to function properly, and may void the warranty on the Electro-Flex™ line.

Cleaning: This Electrode can be cleansed in a 10% bleach 90% water solution with a few drops of dishwashing liquid or anti-bacterial soap. Make sure to rinse the Electrode thoroughly and allow it to dry completely before use. It can also be sprayed with isopropyl alchohol. Do not soak.