P.E.S. Corona Cockhead Stimulator with Urethral Amplifier P.E.S. Corona Cockhead Stimulator with Urethral Amplifier  Ref: 41
Available in three different styles, the P.E.S. Corona "Cockhead" Stimulators each offer their own unique stimulation to the head of the penile shaft.

A must have for "hands-free orgasm", these single pole Electrodes will rapidly become part of your favorite configurations! Please note that in the configurations shown below, the Coronas are interchangeable for each other. Don't limit yourself!

To function properly, the Corona Stimulators require at least one other Electrode in order to complete the circuit.

Instructions for Use:

1.) Attach the one side of the Low Profile Lead to the connection point on the Stimulator.
2.) Liberally lubricate the cockhead and the Corona Stimulator, especially the juncture of the Primary and Secondary Body.
3.) Adjust the Secondary Body to allow for the depth of the cockhead.
4.) Slide the Primary Body over the cockhead until it rests just below the coronal ridge. It is best to apply the Stimulator to a semi-erect penis and “grow” into it.
5.) When using the Stimulator with Urethral Amplifier, insert the Amplifier before adjustment of the Primary & Secondary Bodies.
6.) Adjust the Secondary Body so it is in full contact with the cockhead.
7.) When using the Stimulator with Focusing Pods, the Focusing Pods need to be at least 3/8” apart.
DO NOT place any of the Focusing Pods over the urethral opening.
8.) Attach the other side of the Low Profile Lead to another Electrode to complete the circuit.
9.) Plug the leads into the Power Box.

Important Safety Notes: Due to their design, the Corona "Cockhead" Stimulators should only be used with our low profile lead technology. Use with other leads may cause damage to the Electrodes or they may not function properly.

As these are tubular Electrodes, the entire surface is conductive. It is recommended to wear latex gloves to help prevent accidental above-the-waist contact. This is only necessary when the power source is turned on.

DO NOT share Electrodes that are used for urethral penetration.

Please note that the Secondary Body must be able to move freely through the ring of the Primary Body. For this to be possible, the juncture of the Primary and Secondary Bodies must be thoroughly lubricated. Failure to do so may damage these Electrodes.

General Lubrication: P.E.S. recommends the use of a lubricant with all P.E.S. Electrodes. Lubricant not only lubricates but also decreases the possibility of hot spots. We recommend P.E.S. ElectroLube (Item #75). You can also use Olive Oil. When using the Urethral Amplifier, it is recommended to use a sterile lubricant such as Surgilube®. Make sure the lubricant you are using is a water-based lubricant with no silicone ingredients. (See General Lubrication).

Caution: Do not use lubricants with silicone ingredients. Silicone is an insulator which greatly affects conductivity, and can chemically bond to the products made from Electro-Flex™ when applied over a long period of time. This will cause the apparatus to cease to function properly, and may void the warranty on the Electro-Flex™ line.

Cleaning: This Electrode can be cleansed in a 10% bleach 90% water solution with a few drops of dishwashing liquid or anti-bacterial soap. Make sure to rinse the Electrode thoroughly and allow it to dry completely before use. It can also be sprayed with isopropyl alchohol. Do not soak.