Attach leads to the poles you wish to use
Liberally apply lubricant in and around the orifice you are inserting Stanley into
Relax, relax, relax, relax
Slowly and gently insert Stanley into either the vaginal or anal cavity
Plug your leads into your power source(s) and enjoy the ride
Recommended configurations with Stanley:
* Use a short strip with a long strip and rotate Stanley until the stimulation is exactly where you want it
* Use both long strips on Channel A of your Power Box and one short strip on Channel B for an interesting 3-Electrode Configuration
* Connect both long strips to Power Box A and both short strips to Power Box B and vary your settings on each box
* Again using two Power Boxes, connect a short strip in circuit with a long strip on each box. Vary your adjustments so you get two different sensations from each Power Box.
* With vaginal insertion, adjust Stanley so a long strip is in contact with the G-spot on Channel B and connect both short strips on Channel A. Use the red Power Interrupt Button to cut off the Power to Channel B intermittently to intensify the sensations.
These are just some suggestions. Whether you choose to use your Stanley anally or vaginally, there are lots of different sensations possible. Just find what feels good for you.
Note: Any product used anally should never be used vaginally.
General Lubrication: As with all P.E.S. Products lubrication plays an important part of the effectiveness of these electrodes, including the Anal Plugs. Before use, lubrication should be applied to the contact surface of the electrode before placement, for easy adjustment. This allows the electrode body to move freely for your personal fit. We also recommend the use of our ElectroLube on both your anal area and the electrode itself. This will assist in maintaining good contact (see Lubrication) with the Anal Plugs and will enhance your sensation. P.E.S. recommends washing your hands thoroughly and to use latex gloves to insulate you from any possible above the waist stimulation.